HT9800-K1F2
Introduction
Weighing display controller (aluminum alloy shell)
Application
can be used for packing scales, proportion scales, screening scales, stabilization control devices for upper and lower limits control etc.
Main Technical Index
Range of input signal: -10~35mV
A/D conversion: 24-bit sigma-delta A/D conversion
A/D sampling frequency: 38.400kHz
Nonlinearity:≤0.0015% ﹪F.S.
Gain error drift: 0.5ppm/℃
Minimum resolution: 0.1uV/d
Supply voltage: DC5V/250mA
Transmitting frequency: 433MHZ (32 frequency points optional)
Transmitting distance:≤350m
Transmitting power supply: AC220V
Receiving power supply: AC187~242V, 49~51 HzorDC6V
Operating temperature: 0~40℃
Relative humidity:≤90% ﹪R.H
Transmitting external dimension: 200×125×45mm
Meter external dimension: 210×106×180mm
Main Performance
Data-receiving error-free code
6-bit 0.8-inch high-light LED display
16-channel on-off input/output
Automatic free fall compensation
4-20mA analog output
RS-232C or RS-485 (optional) serial communication interface
Baud rate 1200/2400/4800/9600 (optional)
Anti-static electricity design was adopted for all interfaces to avoid damage
